GE Industrial Solutions A Series Lighting Control Panelboards Installation - Manual

g DEH41081 Installation Instructions R02
A Series
®
Lighting Control Panelboards
Introduction
These instructions describe the installation of a AE
Series lighting control panel interior with internally
mounted as well as externally mounted controller.
Installation
WARNING: Danger of electrical shock or
injury. Turn OFF power service to the line side
of the panel board or switchboard before
working inside the equipment or removing
any component . Equipment is to be installed
and maintained by properly trained and
qualified personnel only.
- 1 -
1. Confirm the contents and circuit layout of the
panel Interior and mounting hardware. Figure 1
illustrates the parts included in this panel Interior,
which are listed in Figure 1.