GE Industrial Solutions 6A Austin MicroLynx II User Manual

Ge energy, 6a austin microlynx, Ii: non-isolated dc-dc power module

Advertising
background image

GE Energy

Data Sheet

October 16, 2012

©2012 General Electric Company. All rights reserved.

6A Austin MicroLynx

TM

II: Non-Isolated DC-DC Power Module

8.3Vdc –14Vdc input; 0.75Vdc to 5.5Vdc output; 6A Output Current



EZ-SEQUENCE

TM

Features

Compliant to RoHS EU Directive 2002/95/EC (-Z versions)

Compliant to ROHS EU Directive 2002/95/EC with lead
solder exemption (non-Z versions)

Flexible output voltage sequencing

EZ-SEQUENCE

TM

Delivers up to 6A output current

High efficiency – 89% at 3.3V full load (V

IN

= 12.0V)

Small size and low profile:

27.9 mm x 11.4 mm x 7.24 mm
(1.10 in x 0.45 in x 0.285 in)

Low output ripple and noise

High Reliability:

Calculated MTBF = 15.3M hours at 25

o

C Full-load

Output voltage programmable from 0.75 Vdc to 5.5Vdc
via external resistor

Line Regulation: 0.3% (typical)

Load Regulation: 0.4% (typical)

Temperature Regulation: 0.4 % (typical)

Remote On/Off

Output overcurrent protection (non-latching)

Wide operating temperature range (-40°C to

85°C)

UL* 60950-1Recognized, CSA

C22.2 No. 60950-1-03

Certified, and VDE

0805:2001-12 (EN60950-1) Licensed

ISO** 9001 and ISO 14001 certified manufacturing
facilities

Applications

Distributed power architectures

Intermediate bus voltage applications

Telecommunications equipment

Servers and storage applications

Networking equipment

Enterprise Networks

Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications

Description

Austin MicroLynx

TM

II 12V SMT (surface mount technology) power modules are non-isolated DC-DC converters that can deliver up

to 6A of output current with full load efficiency of 89% at 5.0V output. These modules provide precisely regulated output voltage
programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input voltage (V

IN

= 8.3 - 14V). The Austin

MicroLynx

TM

II 12V series has a sequencing feature, EZ-SEQUENCE

TM

that enable designers to implement various types of output

voltage sequencing when powering multiple voltages on a board.

*

UL is a registered trademark of Underwriters Laboratories, Inc.

CSA is a registered trademark of Canadian Standards Association.

VDE is a trademark of Verband Deutscher Elektrotechniker e.V.

** ISO is a registered trademark of the International Organization of Standards

RoHS Compliant

Advertising