GE Industrial Solutions Record Plus Plug-In Bases: FC100 - Manual (Page 2)

Product Description
Plug-in bases provide the user with another option for
quick change of breaker and switch assemblies without
disturbing power connections. Two plug-in bases (one
for each terminal end) are required for each protective
device.
Figure 2. Different Orientations of Strap.
Step 1- Unpack and inspect
Unpack the Plug-In and inspect it for any shipping
damage (insure the breaker accessory has the proper
ampere, voltage ratings, wiring routing and
operation for the application. In addition, attach
appropriate labels to side of the breaker if internal
accessories have been installed.).
Item Description Qty
PLUGIN BASE
1 SCREW # 10-32 X 0.625 INCH 3
2 Lock Washer 5
3 WASHER 5
4 MALE PLUG 3
5 SCREW # 10-24x1.75 INCH 2
6 PLUG-IN BASE ASM 1
7 NUT # 10-24 2
8 *MOUNTING PLATE (Optional) 1
*SECONDARY DISCONNECT KIT (Optional) (FCDSD)
9
SECONDARY DISCONNECT
BOTTOM HALF (FCDSDP)
1
10 BREAKER ADAPTOR ASM (FCDSDB) 1
Table 1: List of parts in the Plug-In base kit.
* Items to be ordered separately.
Each plug-in base assembly contains the mounting
hardware necessary to mount the base to either end of
the circuit breaker. Electrical spacing between adjacent
terminals is provided by alternate Long-Short-Long
(LSL) or Short-Long-Short (SLS) terminal assemblies.
These instructions describe the installation procedure
for the plug-in accessory on Record Plus™ FC100
circuit breakers, as shown in Figure 1.
The complete kits are available in the following catalog
number variants:
• Catalog number FCDDF1 provides LSL Horizontal
Strap plug-in base.
• Catalog number FCDDF2 provides SLS Horizontal
Strap plug-in base.
• Catalog number FCDDF3 provides LSL Vertical
Strap plug-in base.
• Catalog number FCDDF4 provides SLS Vertical
Strap plug-in base.
The parts supplied with this kit are listed in Table 1.
Vertical Studs
FCDDF3 (LSL)
FCDDF4 (SLS)
Horizontal Studs
FCDDF1 (LSL)
FCDDF4 (SLS)
[1]
[10]
[3]
[2]
[4]
[5]
[9]
[6]
Figure 3.Plugin Base Kit
[7]
[8]