GE Industrial Solutions EntelliGuard G Arcing contacts assembly User Manual
Page 2
8. Tighten the three mounting screws of
fixed arcing contact to torque of 18-20Nm
(13.3 - 14.8 ft-lbs)
9. Install the arc chamber assembly by
tightening the mounting screws to torque
of 8 -10 Nm (5.9 – 7.4 ft-lbs)
These instructions do not purport to cover all details or variations in equipment nor, to provide contingency to be met in connection
with installation, operation, or maintenance. Should further information be desired, or should particular problems arise which are not
covered sufficiently for the purchaser’s purposes, the matter should be referred to GE.
GE
41 Woodford Ave, Plainville, CT 06062
www.geelectrical.com
© 2009 General Electric Company
DEH-41390 R1 (04
2
/09)