SoundMax SM-DVD5112 - Manual (Page 4)

4
When the device is moved from cold premises to the warm room or vice versa, condensate may form on
the laser head and the device may not operate properly. In this case please turn the device on for 1-2
hours without disc before playback to heat it to a proper operation temperature.
Don’t try to manually open or close the disc tray to load discs.
Disconnect the receiver only when there is no disc therein.
If you are not going to use the device for a long time disconnect it from the wall outlet.
Before turning the device on, please make sure that you have connected it properly; adjust the volume
of speakers and amplifiers of your radio system to the minimum. Adjust the volume as necessary only
after normal playback has started to avoid damage of your audio system.
Use supply sources of rated voltage; otherwise the unit may not function or may be damaged.
Place the unit on a horizontal surface. Keep the unit ventilated. Don’t block the heat hole. Overheat may
cause malfunction.
Do not place any objects on the player’s cover, this may make it function improperly (incorrect
playback).
Please place the device in a dry and well-aired area. Do not place it near heating units or expose it to
direct sunlight, mechanical vibration, humidity or excessive dust.
Never use liquid detergents, abrasives or organic compounds (alcohol, gasoline, etc) to clean the unit
body.
All repairs and technical service should be made by qualified specialist from service centers.
All images provided herein are schematic drawings of real objects and may differ from their real
images.