GE Industrial Solutions Spectra Series ADF Dead Fronts & Type APF Door Fronts - Manual (Page 4)

Figure 11. Attaching the door to the enclosure end wall.
Installation is now complete. Reverse the installation steps
to remove the door and/or dead front to gain access to
the wiring spaces in the enclosure. Turn off power ahead of
the panel before performing any maintenance in wiring
areas.
These instructions do not cover all details or variations in equipment nor do they provide for every possible
contingency that may be met in connection with installation, operation, or maintenance. Should further
information be desired or should particular problems arise that are not covered sufficiently for the purchaser’s
purposes, the matter should be referred to the GE Company.
g
GE Industrial Systems
General Electric Company
41 Woodford Ave., Plainville, CT 06062
GEH5930 R04 0601 © 2001 General Electric Company
Door
Screw
Bracket
Enclosure