GE Industrial Solutions EntelliGuard G Clusters User Manual
Page 2
6. Slide outwards the cluster assembly over
the rear terminals.
Installing Cluster assembly using cluster pliers:
1. Hold & position the cluster plier jaws on
the cluster fingers of the cluster finger
assembly at the rear ends
2. Press the extended handle of the cluster
plier assembly such that the cluster
assembly opens at the other end.
3. Slide the cluster assembly along with the
cluster pliers on to the rear terminals.
4. Release the extended handles gently so
that the clusters properly seats on the
grooves of rear terminal
5. Assemble the breaker in the cassette
These instructions do not purport to cover all details or variations in equipment nor, to provide contingency to be met in connection
with installation, operation, or maintenance. Should further information be desired, or should particular problems arise which are not
covered sufficiently for the purchaser’s purposes, the matter should be referred to GE.
GE
41 Woodford Ave, Plainville, CT 06062
www.geelectrical.com
© 2009 General Electric Company
DEH-41460 R1 (04
2
/09)