GE Industrial Solutions PowerVac PV-VL 13.8-1000-0 and -1 - Manual (Page 40)

Page 40 GEH 6468A - Power/Vac VL Breaker
TABLE OF MEASUREMENTS
ITEM BREAKER CL SPRING OP SPRING MEASUREMENT
Contact
Wipe Open
Closed Charged
Charged Discharged
Charged Measure between erosion disk
and wipe indicator.
Contact
Gap Open
Closed Charged
Charged Discharged
Charged Measure the travel of the
operating rod insulator.
Contact
Erosion Closed Discharged Charged Measure between erosion disk
and reference arm.
Trip Coil Closed Discharged Charged Measure between plunger
button and coil housing.
Close Coil Open Charged Discharged Measure between plunger
button and coil housing
Control
Switches Open Discharged Discharged Depends on switch type
See Section 8.6.
Timing See Section 12.
Contact
Speeds See Section 13.
TABLE OF ADJUSTMENTS
ITEM BREAKER CL SPRING OP SPRING MEASUREMENT
Contact
Wipe Closed Charged Charged Adjust operating rod to obtain
required dimensions.
Contact
Gap Open Charged Discharged Advance or retard gap adjusting
nuts to set gap.
Contact
Erosion Closed Discharged Charged Align Reference arm with disk on
new units only.
Trip Coil Closed Discharged Charged Turn adjusting nut to obtain
required dimension.
Close Coil Open Charged Discharged Turn adjusting nut to obtain
required dimensions.
Control
Switches Open Discharged Discharged Adjust mounting bracket to
obtain required dimension.
Overtravel
Stop Open Discharged Discharged See Section 16.3 for adjustment.