GE Industrial Solutions Tranquell Series User Manual
GE Industrial Solutions Equipment
Installation Instructions
Pro-Stock Panelboards with TRANQUELL
Medium Exposure TVSS
2020000903 (10/04) Page 1 of 9
INSTALLATION INSTRUCTIONS:
Pro-Stock Panelboards with
TRANQUELL
Medium Exposure Transient Voltage Surge Suppressor
IMPORTANT NOTICE
THE ENTIRE CONTENT OF THIS MANUAL MUST BE READ AND FULLY
UNDERSTOOD BEFORE ATTEMPTING ANY INSTALLATION OF THE TRANQUELL
SERIES TVSS.
If there are any questions about the operational status, or integrity of the electrical system prior
to installation of the TVSS, please consult a qualified trained electrician before attempting to
continue.
If the minimum requirements of this manual are not followed, the TVSS could become
irreversibly damaged, and/or the electrical system could be left unprotected.
Choosing the right product for the application, along with correct installation methods, as
defined within this manual, will allow the Tranquell TVSS to provide the best possible protection
for many years.
Failure to comply with the applicable requirements of this manual can void the TVSS warranty.
SPECIAL ATTENTION MUST BE GIVEN TO VERIFY THAT A PROPER
NEUTRAL-GROUND (XO) BOND HAS BEEN MADE WHEN POWER IS
SUPPLIED FROM AN UPSTREAM TRANSFORMER OR ANY OTHER
TYPE OF SEPARATELY DERIVED POWER SOURCE.
FAILURE TO PROVIDE THIS BOND, AS REQUIRED PER ARTICLE
250.30 OF THE NATIONAL ELECTRICAL CODE, CAN RESULT IN
ELEVATED PHASE TO GROUND SOURCE VOLTAGE POTENTIALS.
THESE VOLTAGES CAN CAUSE DAMAGE TO ELECTRICAL
EQUIPMENT AS WELL AS SAFETY HAZARDS INCLUDING FIRE,
ELECTRICAL SHOCK, SERIOUS INJURY, OR DEATH.
id9779221 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com