GE Industrial Solutions Remote Racking Operator: Low Voltage AKR Circuit Breakers - Manual (Page 13)

Remote Racking Operator for AKR Breakers
13
1. Place the bottom flange of the template
above the bottom edge of the door cutout. Both
press studs will be on the inside of the cutout.
3. Drill (1) 0.251”
diameter hole
through the door.
2. Drill (1) 1.75”
diameter hole
through the door.
Figure 8
Door drilling template for AKR 30/50 doors.
Existing AKR 30/50 breaker door.