GE Industrial Solutions Record Plus FG600 with SMR1 or SMR2 Trip Unit - Manual

Introduction
Congratulations and thank you for choosing
the Record Plus™ family of current-limiting
circuit breakers.
Record Plus™ circuit breakers are designed to
provide overload and short circuit protection
to electrical distribution and utilization
equipment. All units use integrated modular
circuit breaker technology to allow flexibility
in a broad range of applications.
Record Plus™ circuit breakers are listed by
Underwriters Laboratories to the UL489
standard and the CSA Standard C22.2, No. 5.
These circuit breakers are certified to
EN 60947-2.
Record Plus™ circuit breakers and their
accessories are designed and manufactured
to exceed our global customers’ high
standards for reliability and quality.
WARNING
: DANGER of electrical shock or injury.
Ensure ALL electrical power supplies are OFF before installing
or removing any devices. Do not remove circuit protective
devices until the power is turned OFF. The breaker, trip unit, or
accessories MUST ONLY be installed and serviced by
QUALIFIED personnel. See NEMA publication AB4.
CAUTION
: This product is NOT suitable for use in
equipment not specifically designed to accept it. Contact the
equipment manufacturer for possible equipment modifications.
Record Plus TM FG600A current-limiting two and three pole
Mould case circuit breaker.
DEH41177 Installation Instructions R03
Record Plus™FG600
Current Limiting Molded-Case Circuit Breaker