GE Industrial Solutions PIM400 Series - Manual (Page 2)

GE
Data Sheet
PIM400 Series; ATCA Board Power Input Modules
-36 to -75 Vdc; 400W/10A
June 20, 2013 ©2013 General Electric Company. All rights reserved. Page 2
ATCA Board Typical Application
External Holdup Capacitor Selection External Holdup Trim Resistor Selection
Suggested Bill of Materials
(Note: Customer is ultimately responsible for the final selection and verification of the suggested parts for the end application).
Ref Des
Description
(Values)
Comments
F1-F4 Fuses (15A) Max fuse rating not to exceed 20A, fast acting
F5,F6 Fuses (15A) 0.5 to 1A rated
R1,R2 Pre-charge Resistors (15 Ohms) High Surge Power Type e.g. KOA P/N SG73
R_TRIM Resistor See Design Consideration section for details
R_PULLUP Resistor (3.3 kOhms) Alarm pull-up resistor
C_FLTR Capacitor(s) (100  F) 270  F (max)
C_HLDP Capacitor(s) 3300  F (max); see Design Consideration section for details
C_OUT Capacitor(s) Consult data sheet for the applicable DC/DC Bus Converter
C_EMI Capacitors See Design Consideration section for details