GE Industrial Solutions SW-SC001-003 Series - Manual

GE
Data Sheet
October 14, 2013 ©2013 General Electric Company. All rights reserved. Page 1
SW/SC001/003 Series DC-DC Converter Power Modules:
18-36V & 36-75Vdc Input; 3.3V-15Vdc Output; 1-3.5A Output Current
Features
 Compliant to RoHS II EU Directive 2011/65/EC (-Z versions)
 Compliant to ROHS EU Directive 2002/95/EC with lead solder
exemption (non-Z versions)
 Delivers up to 3.5A Output current
15V (1A), 12V (1.25A), 5.0V (3A) and 3.3V (3.5A)
 High efficiency – 86% at 5.0V full load (V
IN
=54 Vdc)
 Low output ripple and noise
 Small Size and low profile
27.94mm x 24.38mm x 8.5mm
(1.10 x 0.96 x 0.335 in)
 Industry Standard pin-out:
TH version is LW series compatible
 Surface mount (SMT) or Through hole (TH)
 Remote On/Off (optional pin on TH version)
 Output overcurrent/voltage protection
 Single Tightly regulated output
 Output voltage adjustment trim  10%
 Wide operating temperature range (-40°C to 85°C)
 Meets the voltage insulation requirements for ETSI 300-132-2
and complies with and is Licensed for Basic Insulation rating per
EN 60950
 CE mark meets the 2006/95/EC directive §
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-03 Certified,
and VDE ‡ 0805: (IEC60950, 3 rd Edition) Licensed
 ISO** 9001 and ISO 14001 certified manufacturing facilities
 Approved for Basic Insulation
Applications
 Wireless Networks
 Distributed power architectures
 Optical and Access Network Equipment
 Enterprise Networks
 Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Options
 Remote On/Off logic (positive or negative), pin
optional for TH version (Suffix 1 or 4)
 Output voltage adjustment-Trim, pin optional for
TH version (Suffix 9)
 Surface Mount/Tape and Reel (-SR Suffix)
Description
The SW/SC series power modules are isolated dc-dc converters that operate over a wide range of input voltage (V
IN
= 18 - 36Vdc
for SC modules and V
IN
= 36 – 75Vdc for SW modules) and provide a single precisely regulated output. This series is a low cost,
smaller size alternative to the existing LW/LAW/LC with enhanced performance parameters. The output is fully isolated from the
input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, typical efficiency
of 86% for 5.0V/3A. Built-in filtering for both input and output minimizes the need for external filtering.
§ This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment should be followed.
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
RoHS Compliant Representative Photo.
Actual product may vary.