GE Industrial Solutions SW-SC001-003 Series - Manual (Page 25)

GE Data Sheet
SW/SC001/003 Series DC-DC Power Module
18-36Vdc & 36-75Vdc Input; 3.3-15Vdc Output; 1-3.5A Output Current
Contact Us
For more information, call us at
USA/Canada:
+1 888 546 3243 , or +1 972 244 9288
Asia-Pacific:
+86.021.54279977*808
Europe, Middle-East and Africa:
+49.89.878067-280
India:
+91.80.28411633
www.ge.com/powerelectronics
October 14, 2013 ©2013 General Electric Company. All rights reserved. Version 1.97
Table 3. Device Options
Option* Device Code Suffix**
Negative remote on/off logic (On/Off pin fitted) † 1
Positive remote on/off logic (On/Off pin fitted) † 4
Mechanically Trimmed Short Pins, 3.68 mm ± 0.25mm (0.145 in. ± 0.010 in.) 6
Output Voltage Adjustment (Trim pin fitted) † 9
Uncut Short Pins, 3.68 mm ± 0.25mm (0.145 in. ± 0.020 in.) -35
Surface mount connections, SMT (Tape & Reel) -SR
RoHS Compliant -Z
* Please contact GE Sales Representative for availability of these options, samples, minimum order quantity and lead times. Legacy
device codes may contain a –B option suffix to indicate 100% factory Hi-Pot tested to the isolation voltage specified in the
Absolute Maximum Ratings table. The 100% Hi-Pot test is now applied to all device codes, with or without the –B option suffix.
Existing comcodes for devices with the –B suffix are still valid; however, no new comcodes for devices containing the –B suffix will
be created.
** When adding multiple options to the product code, add numerical suffix codes in the descending order.
† Either negative or positive logic (1 or 4), and output voltage adjustment (trim, 9) must be ordered on surface mount , SMT (-SR)
device codes. Both the on/off pin and trim pin will be provided on all –SR device codes.