GE Industrial Solutions D14A4F expanded I_O for AV-300i Drives - Manual (Page 11)

11 —————— I/O Expansion card ——————
D14A4F
4. JUMPERS
Name Default
S2 Adaptation to the input signal of analog input 0 OFF
ON 0 … 20mA / 4 … 20mA
OFF 0 … 10V / -10V … +10V
S3 Adaptation to the input signal of analog input 1 OFF
ON 0 … 20mA / 4 … 20mA
OFF 0 … 10V / -10V … +10V
S7 ON 0 Channel included in the encoder loss logic OFF
OFF 0 Channel not included in the encoder loss logic
expD70
Description
EXP-D14A4F board
Set Jumper to ON when encoder loss detection is used also for zero channel.
(Alarm active only if a digital encoder with all A, Anot, B, Bnot channels and
+15V/24V power supply is used).
I/O available depending on drive firmware version
Drive firmware 1.X from 2.X
Digital Inputs 4 8
Digital Outputs 6 6
Analog Inputs - 2
Analog Outputs 2 2
Encoder Input 1 1
expD75