GE Industrial Solutions D14A4F expanded I_O for AV-300i Drives - Manual (Page 14)

—————— I/O Expansion card —————— 14
GEI-100426
Analog outputs
Output type ________________________________ Voltage
Outputs no. ________________________________ 2
Max Output voltage __________________________ ±10V
Output current ______________________________ 5mA max
Bandwidth _________________________________ 265Hz
Encoder interface
Interface type _______________________________ optocoupled digital encoder
input interface
Standard inputs ______________________________ A+,A-,B+,B-,0+,0-
Additional input for encoder qualifier ____________ C1+,C1- (optocoupled)
Encoder power supply ________________________ +5V or 15V/24V, selectable
Voltage input range High level (on pin) ) (U
High
) _____ 2.5V up to 5.25V (@5V)
9 up to26V (@15V/24V)
Voltage input range Low level (on pin) ) (U
Low
) _____ <= 0.8V (@5V)
<= 1.6V (@15V÷24V)
Current input value (@ 5V, on pin) ______________ 10mA
Current input value (@ 15V, on pin) _____________ 8mA
Current input value (@ 24V, on pin) _____________ 13mA
Voltage (Current) value additional input for encoder qualifier
__________________________________________ 15 up to 30V (4.5up to 9mA)
No. encoder pulses ___________________________ 600 up to 9999
Max Frequency input _________________________ 150kHz
Temperature
Storage temperature: __________________________ -20°... +70°C (-68...+158°F)
Operating temperature: ________________________ 0°... +55°C (32...+131°F)
These temperatures are adequate to those of the drive, to which the card is connected.