GE Industrial Solutions SHHD003A0A Hammerhead Series - Manual

GE
Data Sheet
June 26, 2013 ©2012 General Electric Company. All rights reserved. Page 1
SHHD003A0A Hammerhead* Series; DC-DC Converter Power Modules
18-75Vdc Input; 5.0Vdc, 3A, 15W Output
Features
 Compliant to RoHS II EU “Directive 2011/65/EU (-Z versions)
 Compliant to REACH Directive (EC) No 1907/2006
 Ultra-wide Input Voltage Range, 18Vdc to 75Vdc
 No minimum load
 High efficiency – 87.0% at full load (Vin=24 or 48Vdc)
 Constant switching frequency
 Low output ripple and noise
 Small Size and low profile, follows industry standard 1x1
footprint
27.9mm x 24.4mm x 8.5mm (MAX)
(1.10 x 0.96 x 0.335 in)
 Surface mount (SMT) or Through hole (TH)
 Reflow process compliant, both SMT and TH versions
 Positive Remote On/Off logic
 Output overcurrent/voltage protection (hiccup)
 Over-temperature protection
 Output Voltage adjust: 90% to 110% of V
o,nom
 Wide operating temperature range (-40°C to 85°C)
 CAN/CSA † C22.2 No. 60950-1-07, 2 nd Edition + A1:2011
(MOD), ANSI/UL # 60950-1-2011, December 19, 2011; DIN EN
60950-1 (VDE ‡ 0805-1):2011-01 DIN EN 60950-1/A12 (VDE
0805-1/A12):2011-08 EN 60950-1:2006 + A11:2009 +
A1:2010 + A12:2011 IEC 60950-1:2005 (2
nd Edition);
am1:2009
 CE mark meets 2006/95/EC directive §
 Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3 ¤ PoE
standards
 ISO ** 9001 and ISO 14001 certified manufacturing facilities
Applications
 Wireless Networks
 Hybrid power architectures
 Optical and Access Network Equipment
 Enterprise Networks including Power over Ethernet (PoE)
 Industrial markets
Options
 Negative Remote On/Off logic
 Surface Mount/Tape and Reel (-SR Suffix)
Description
The SHHD003A0A Hammerhead series power modules are isolated dc-dc converters that operate over an ultra-wide input voltage
range of 18 Vdc -75Vdc and provide a single precisely regulated output voltage at 5.0Vdc. This series is a low cost, smaller size
alternative to the existing LW/LAW/LC/SC/SW with enhanced performance parameters. The output is fully isolated from the input,
allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency of 87.0% typical at full
load. Built-in filtering for both input and output minimizes the need for external filtering. The module is fully self-protected with
output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional features include
negative or positive on/off logic and SMT connections.
* Trademark of General Electric Company
# UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.
RoHS Compliant