GE Industrial Solutions LONWORKS Interface Card OPC-G11S-LON - Manual (Page 11)

Document number: 80-0098 Data subject to change without notice 5/00. © General Electric Company
Installation
This chapter covers the installation of the L ON W ORKS Interface Card into the AF-
300 G11 or P11 variable speed drive (VSD) and the physical connection to the
LON.
The Interface Card is shipped enclosed in a plastic housing that you have to install
into the drive. The assembly is designed to integrate seamlessly within the VSD
under the keypad so that the NEMA rating of the drive is maintained. Figure 1
shows the Card assembly.
Follow the procedure to install the assembly in the VSD.
To remove the keypad:
Q‚r Гq‚Г‡urÃq v‰r
! Sr€‚‰rÇurǐ‚Ãxr’ƒhqÀ‚ˆ‡vtÆp r†Æu‚ÃvÃAvtˆ rà ÃhqÇhxrÇurÃxr’ƒhqˆ‡
5XVdaT .H\SDG PRXQWLQJ VFUHZV