GE Industrial Solutions PowerVac with ML-18 or ML-18H Mechanism - Manual (Page 13)

13
be required, adjust the wiring terminals and set the plunger
dimension from .99 to 1.01 from its mounting bracket as
shown in Fig.11.
8.6.3 IL/MS Switch adjustment
The nut should be adjusted to fully extend the plunger.
AUXILIARY
SWITCH
STACK SWITCH
NEGATIVE
INTERLOCK
BAR
IL/MS SWITCH
SHIM PLACEMENT
CLMS SWITCH
ML 18 TYPE –0, -1, & -2
CLMS SWITCH
ML 18 TYPE –3
ML 18 H TYPE -0
Figure 11 Control Switches
LCS SWITCH