GE Industrial Solutions 6KCV301PDP33 Profibus - DP Bus for AV300i - Manual (Page 8)

—————— HARDWARE DESCRIPTION ——————
2 8
GEI-100422
2.2 MOUNTING
The 6KCV301PDP33 card is supplied with standoffs, screws, washers and a
6KCV301PDP33-Drive link cable provided with connectors.
1. Switch the drive off.
2. If the card is inside the drive mounted (see example below), fasten the
6KCV301PDP33 card to the drive regulation board by means of screws
(B) and standoffs (A). The 6KCV301PDP33-Drive link cable (C) must be
connected between XT1 (on Regulation board) and XT (on
6KCV301PDP33 card).
If the card is mounted outside the drive, the 6KCV301PDP33 card has to
be fastened to a DIN rail by using the external mounting kit; it is
recommended to keep the 6KCV301PDP33 card as close as possible to the
drive. Do not put the 6KCV301PDP33-Drive link cable near power cables.