GC EUROPE Fujivest Super - Manual (Page 50)

50
Fig. 1 The working model which was chosen for
the demonstration of a fixed three unit posterior
bridge and two upper central PFM crowns. Fig. 2 The already blocked-out dies are being
separated using GC Multisep.
Fig. 3 The wax copings are being formed with
the help of the dipping technique using a special
non-contracting dipping wax. Fig. 4 The dipped wax copings on the model.
Fig. 5 An inorganic wax is used to design the
coping for adequate porcelain support. Fig. 6 The root socket is being separated.