Net Optics 10_100 to Triple-speed Port Aggregator User Manual
Page 8
10/100 to Triple-speed Port Aggregator
4
About This Guide
This guide explains how to install the 10/100 to Triple-speed Port Aggregator .
Please read this Guide before attempting to install the equipment .
This guide covers the following model: Model TPA-CU .
Unpacking and Inspection
Carefully unpack the 10/100 to Triple-speed Port Aggregator and check for
damaged or missing parts . The Tap ships with the following:
• 10/100 to Triple-speed Port Aggregator (TPA-CU)
• Two power supplies
• Two network cables
• Two monitor cables
• Installation Guide
You may have also ordered a one-rack-unit panel for mounting two Taps and an
extended warranty . Carefully check the packing slip against parts received . If any
part is missing or damaged, contact Net Optics Customer Service immediately .