Net Optics GigaBit SX_LX to TX Tap - Manual (Page 10)

GigaBit SX/LX to TX Tap
6
Connecting to the Network
1 . Connect Network Port A to the appropriate network device using a Duplex
LC cable .
2 . Connect Network Port B to the appropriate network device using a Duplex
LC cable .
3 . Verify that the Tap Network Ports are cabled in-line between two devices .
Note: ________________________________________________________________
The use of Singlemode (8.5µm) or Multimode (50µm or 62.5µm) cabling is
determined by the model purchased.
______________________________________________________________________
Figure 4: Connecting to the Network
www.netoptics.com
Network
1
2
ACT
LINK
GigaBit
Converter Tap
GigaBit
Converter Tap
A B
Monitor A B
A B
ACT LINK ACT LINK
LASER
CAUTION!
To Network Device, Switch or Router
To Network Device, Switch or Router