Net Optics GigaBit SX_LX to TX Tap - Manual (Page 6)

GigaBit SX/LX to TX Tap
2
Key Features
Passive, Secure Technology
• Provides passive access at 1000 Mbps without data stream interference or
introducing a point of failure
• Access SX or LX links with GigaBit copper devices without a separate
converter
• Permanent in-line installation without affecting network performance
• Passes all full-duplex traffic (including errors) from all layers for
comprehensive troubleshooting
• No IP address is needed for the Tap or monitoring device, enhancing
monitoring security
• Redundant power ensures monitoring uptime
• Fully IEEE 802 .3 compliant
• Fully RoHS compliant
Ease of Use
• LED indicators show redundant power and link status
• Front-mounted connectors make installation and operation quick and easy
• All networking and monitoring cables are included
• Silk-screened application diagram illustrates all connections for easy
deployment
• Optional 19-inch rack frames hold up to 3 or 12 Taps
• Tested and compatible with all major manufacturers’ monitoring devices,
including protocol analyzers, probes, and intrusion detection/prevention
systems
Support
• Net Optics offers free technical support throughout the lifetime of your
purchase. Our technical support team is available from 8 am to 5 pm Pacific
Time, Monday through Friday at +1 (408) 737-7777 and via email at
ts-support@netoptics .com . FAQs are also available on Net Optics website
at www .netoptics .com .