Asus Terminator P-III - Manual (Page 11)

ASUS Terminator Barebone System 11
1.2 Rear Panel Features
The rear panel of the ASUS Terminator barebone system includes
the standard PC99 I/O connectors for external devices, power supply
socket, and optional modem connectors.
The following figure shows the rear panel features.
CAUTION!
Setting the switch to 115V in a 230V environment will seriously
damage the system.
Voltage Selector
The switching power supply that came with
the system has a voltage selector switch
beside the power socket. Use this switch
to select the appropriate voltage according
to the voltage supply in your area.
If the voltage supply in your area is
100-127V, set the switch to 115V.
If the voltage supply in your area is
200-240V, set the switch to 230V.
Game/MIDI Connector
Serial Port (COM1)
PS/2 Mouse Connector
PS/2 Keyboard Connector
Parallel Connector
VGA Port
Line Out Connector
Line In Connector
Microphone Connector
LAN Connector (RJ-45)
USB Connectors (Ports 0&1)
Modem (optional) Power Supply
115V/230V
Voltage Selector