3 jumper settings, Asus terminator barebone system 33 – Asus Terminator P-III User Manual

Page 33

Advertising
background image

ASUS Terminator Barebone System

33

CUSC

®

CUSC PDN Setting

(Default)

Use Secondary
Device

Use Primary
Device

PDN

1

1

CUSC

®

CUSC Clear RTC RAM

Short solder points
to Clear CMOS

CLRTC

CR2032 3V

Lithium Cell

CMOS Power

3. PDN Setting. This jumper allows you to select the primary and

secondary Audio Modem Riser (AMR) device. Set to 1-2 to use a
secondary AMR device, or set to 2-3 to use a primary AMR device.
Disable the onboard AC97 audio parameter in BIOS when you
use a primary AMR.

4. Clear RTC RAM. This jumper allows you to clear the Real Time

Clock (RTC) RAM in CMOS. You can clear the CMOS memory of
date, time, and system setup parameters by erasing the CMOS
RTC RAM data. The RAM data in CMOS, that include system
setup information such as system passwords, is powered by the
onboard button cell battery.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Short the jumper.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter

BIOS setup to re-enter data.

3.3 Jumper Settings

Advertising