4 onboard device configuration, Sata controller [enabled, Sata controller mode [ide – Asus V3-P5V900 User Manual
Page 87: Hda controller [auto, Onboard lan device [enabled, Onboard lan boot rom [disabled, Serial port1 address [3f8/irq4
5-23
ASUS V-Series P5V900
SATA Controller [Enabled]
Enable/Disable Onchip SATA. Configuration options: [Disabled] [Enabled]
SATA Controller Mode [IDE]
Select SATA mode. Configuration options: [IDE] [RAID]
HDA Controller [Auto]
Enable/Disable High Definition Audio controller. Configuration options:
[Auto] [Disabled]
Onboard LAN Device [Enabled]
Enable/Disable onboard LAN. Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Enable/Disable the bootrom of the onboard LAN. Configuration options:
[Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Enable/Disable the bootrom of the onboard LAN. Configuration options:
[Enabled] [Disabled]
F1:Help ↑↓ : Select Item
-/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu
Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to set
Onboard Device Configuration
SATA Controller
[Enabled]
SATA Controller Mode
[IDE]
HDA Controller
[Auto]
Onboard LAN Device
[Enabled]
Onboard LAN Boot ROM
[Disabled]
Serial Port1 Address
[3F8/IRQ4]
Parallel Port Address
[378/IRQ7]
Parallel Port Mode
[Bi-Directiional]
ECP Mode Use DMA
[3]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
5.4.4 Onboard Device Configuration