Asus V3-P5V900 - Manual (Page 92)

5-28 Chapter 5: BIOS setup
5.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. Select an item then press <Enter> to
display the configuration options.
Select Menu
Item Specific Help
Press [Enter] to enable or
disable.
Hardware Monitor
Q-Fan Controller [Enabled]
Vcore Voltage [1.29V]
3.3V Voltage [3.33V]
5V Voltage [4.96V]
x 12V Voltage [11.96V]
CPU Temperature 54C
M/B Temperature 40C
CPU Fan Speed 2136 RPM
Chassis Fan Speed 0 RPM
CPU Fan Speed warning [800 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Q-Fan Controller [Enabled]
Disable or Enable the Q-Fan controller. Configuration options: [Disabled]
[Enabled]
Vcore Voltage [Enabled]
Sets the Vcore Voltage. Configuration options: [1.29V] [Ignored]
3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU/Chassis Fan Speed
The onboard hardware monitor automatically detects and
displays the CPU and chassis fan speeds in rotations per
minute (RPM). These items are not user-configurable.