2 chipset, 3 onboard devices configuration – Asus M4A87TD EVO User Manual

Page 63

Advertising
background image

Chapter 2: BIOS setup

2-17

2.6.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then

press <Enter> to display the submenu.

DRAM Controller configuration

Channel Interleaving [XOR of Address bit]
Configuration options: [Disabled] [Address bits 6] [Address bits 12]

[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Always]
Configuration options: [Auto] [Always]
Power Down Enable [Disabled]
Enables or disables the DDR power down mode.

Configuration options: [Disabled] [Enabled]

Power Down Mode [Channel]
This item appears only when you enable the previous item and allows you to set the DDR power

down mode. Configuration options: [Channel] [Chip Select]

ECC Configuration

ECC Mode [Disabled]
Disables or sets the DRAM ECC mode that allows the hardware to report and correct

memory errors.

[Disabled] Disables the DRAM ECC mode.
[Basic]

Set to [Basic] to adjust ECC mode automatically.

[Good]

Set to [Good] to adjust ECC mode automatically.

[Super]

Set to [Super] to adjust the DRAM BG Scrub sub-item manually.

[Max]

Set to [Max] to adjust ECC mode automatically.

[User]

Set to [User] to adjust all the subitems manually.

Primary Display Adapter [PCI-E]

Allows you to select the graphics controller to use as the primary boot device.

Configuration options: [PCI-E] [PCI]

2.6.3

Onboard Devices Configuration

HD Audio Azalia Device [Enabled]

Allows you to enable or disable the HD Audio controller.

Configuration options: [Disabled] [Enabled]

The following item appear only when you set the HD Audio Azalia Device item to [Enabled].

Advertising