8 boot menu, 1 boot device priority, 2 boot settings configuration – Asus M4A87TD EVO User Manual

Page 69: 1st–xxth boot device, Quick boot [enabled, Full screen logo [enabled, Addon rom display mode [force bios, Bootup num-lock [on, Wait for ‘f1’ if error [enabled, Hit ‘del’ message display [enabled

Advertising
background image

Chapter 2: BIOS setup

2-23

2.8

Boot menu

The Boot menu items allow you to change the system boot options. Select an item then

press <Enter> to display the submenu.

2.8.1

Boot Device Priority

1st–xxth Boot Device

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system.

Configuration options: [1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM] [Disabled]

2.8.2

Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to

decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the

POST items. Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.

Configuration options: [Disabled] [Enabled]

Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]

Wait for ‘F1’ If Error [Enabled]

When set to [Enabled], the system waits for the F1 key to be pressed when error occurs.

Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When set to [Enabled], the system displays the message Press DEL to run Setup during

POST. Configuration options: [Disabled] [Enabled]

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

BIOS SETUP UTILITY

Main Ai Tweaker Advanced Power

Boot

Tools Exit

Boot Settings

Boot Device Priority

Boot Settings Configuration

Security

←→

Select Screen

↑↓

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

Specifies the Boot

Device Priority

sequence.

A virtual floppy disk

drive (Floppy Drive B:

) may appear when you

set the CD-ROM drive

as the first boot

device.

Advertising