Asus P5BV/SAS User Manual
Page 150
5-52
Chapter 5: RAID configuration
3. The View Existing Array screen appears. Here you can view properties of
the RAID array(s) created. If you have configured a hot spare, it will also be
listed. if you created more than one array, you may view the next array by
pressing <Alt+N>.
Esc = Exit Menu F1/Shift+1 = Help
Enter=Select Item Alt+N=Next Array C = Create an array
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
View Array -- SAS1068
Array 1 of 1
Identifier LSILOGICLogical Volume 3000
Type IME
Scan Order 0
Size(MB) 51498
Status Optimal
Manage Array
Slot Device Identifier RAID Hot Drive Pred Size
Num
Disk Spr Status Fail (MB)
0
SEAGATE ST373454SS 0003 Yes NO Ok No 34331
2
SEAGATE ST373454SS 0003 Yes NO Ok No 34331
3
SEAGATE ST373454SS 0003 Yes NO Ok No 34331