Asus RX3041H - Manual (Page 101)

RX3041H User’s Manual Chapter 10. Configuring Remote Access
87
1. Open the User Group configuration page by clicking the Remote Access Î User Group menu.
2. Select an existing group from the user group drop-down list.
3. Select “Add New User” from the user drop-down list.
4. Enter a unique user name in the User Name field.
5. Click on the “Enable” or “Disable” radio button in the User State field to enable or disable this user.
6. Enter the password in the Password field for this user.
7. Confirm the password by entering again the password in the Confirm Password field.
8. Click on the button to add the new user.
10.2.3 Modify a User Group or a User
To modify a user group and/or a user, follow the instructions below:
1. Open the User Group configuration page by clicking the Remote Access Î User Group menu.
2. Select an existing user group from the user group drop-down list. If you just want to modify the
attributes of an existing user, please skip to step 4.
3. Make desired changes in the Group State and/or Inactivity Timeout fields. If you don’t intend to
modify attributes of existing users in the group, please skip to step 6. Note that the group name
cannot be changed. To change the group name, you must first delete the existing group and then
create a new group with the desired name.
4. Select an existing user from the user drop-down list.
5. Make desired changes in the User State, Password and Confirm Password fields. Note that the
user name cannot be changed. To change the user name, you must delete the existing user and
then create a new user with the desired name.
6. Click on the button to save the new settings.
10.2.4 Delete a User Group or a User
To delete a user group, follow the instructions below:
1. Open the User Group configuration page by clicking the Remote Access Î User Group menu.
2. Select an existing user group from the user group drop-down list.
3. Click on the button to delete this user group. Note that a user group cannot be deleted
unless all the users belong to the group are deleted first.
To delete a user, simply click on the icon of the user in the Remote User List table in the User Group
configuration page or follow the instruction below:
1. Open the User Group configuration page by clicking the Remote Access Î User Group menu.
2. Click on the icon of the user to be deleted in the Remote User List table or select the user
from the User drop-down list.
3. Click on the button to delete this user.