Asus P3-PE5 - Manual (Page 84)

5-24 Chapter 5: BIOS setup
JMicron RAID controller [IDE]
Allows you to disable JMicron RAID controller or sets to IDE/RAID mode.
Configuration options: [Disabled] [IDE] [RAID]
SATA Controller [Enabled]
Enable/Disable Onchip SATA. Configuration options: [Disabled] [Enabled]
SATA Controller Mode [IDE]
Select SATA mode. Configuration options: [IDE] [RAID]
Ex-SATA/PCI-E*1 Option [Ex-SATA]
Allows you to switch Ex-SATA and PCI-E*1 controller.
Configuration options: [Ex-SATA] [PCI-E*1]
HDA Controller [Auto]
Enable/Disable High Definition Audio controller. Configuration options:
[Auto] [Disabled]
Onboard LAN [Enabled]
Enable/Disable onboard LAN. Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Enable/Disable the bootrom of the onboard LAN. Configuration options:
[Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Enable/Disable the bootrom of the onboard LAN. Configuration options:
[Enabled] [Disabled]
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to set
Onboard Device Configuration
JMicron RAID controller [IDE]
SATA Controller [Enabled]
SATA Controller Mode [IDE]
Ex-SATA/PCI-E*1 Option [Ex-SATA]
HDA Controller [Auto]
Onboard LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [Bi-Directiional]
ECP Mode Use DMA [3]
Midi Port Address [330]
Midi Port IRQ [10]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
5.4.4 Onboard Device Configuration