Asus D1T - Manual (Page 35)

35
Using the Portable Desktop PC
4
Optical Drive
Inserting an optical disc
1. While the Portable Desktop PC’s power is
ON, press the drive’s eject button and the tray
will eject out partially.
2. Gently pull on the drive’s front panel and slide the
tray completely out. Be careful not to touch the
CD drive lens and other mechanisms. Make sure
there are no obstructions that may get jammed
under the drive’s tray.
3. Hold the disc by the edge and face the disc’s
printed side up. Push down on both sides of
the disc’s center until the disc snaps onto the
hub. The hub should be higher than the disc
when correctly mounted.
4. Slowly push the drive’s tray back in. The drive will
begin reading the table of contents (TOC) on the
disc. When the drive stops, the disc is ready to be
used.
NOTE: It is normal to hear as well as feel the CD spinning with great intensity in the
CD drive while data is read. If there is a problem in ejecting the tray, insert a straightend
paper clip into the hole to the right of the tray eject button for manual ejection.
1
1 A S
2
1 A S
3
1 A S
4
1 A S
(CLASS 1 LASER PRODUCT)
(LASER KLASSE 1)