Asus D1T - Manual (Page 41)

41
Using the Portable Desktop PC
4
32-bit CardBus Support
CardBus support allows PC Cards and their hosts to use 32-bit bus mastering and operate at speeds of
up to 33MHz, transferring data in burst modes comparable with PCI’s 132MB/sec. By comparison, the
standard 16-bit PC Card bus can handle only 20MB/sec. Since the Portable Desktop PC is equipped
with CardBus broader and faster data pathway, it can handle bandwidth-hungry operations, such as
100Mbps Fast Ethernet, Fast SCSI peripherals, and ISDN-based video conference. The CardBus
peripherals support plug and play.
The CardBus socket is backward-compatible with 16-bit PC Cards serving at 5 volts operation while
CardBus operates at 3.3 volts to reduce power consumption.
PC Card (PCMCIA) Socket
The Portable Desktop PC supports PC Cards (or sometimes referred to as PCMCIA cards) to allow
expansion like PCI cards on desktop computers. This allows you to customize your Portable Desktop
PC to meet a wide range of application needs. The PCMCIA socket can interface with type I or type II
PC cards. PC cards are about the size of a few stacked credit cards and have a 68-pin connector at one
end. The PC Card standard accommodates a number of function, communication, and data storage
expansion options. PC cards come in memory/flash cards, fax/modems, networking adapters, SCSI
adapters, MPEG I/II decoder cards, Smart Cards, and even wireless modem or LAN cards. The Portable
Desktop PC supports PCMCIA 2.1, and 32bit CardBus standards.
The three different PC Card standards actually have different thicknesses. Type I cards are 3.3mm,
Type II cards are 5mm, and Type III cards are 10.5mm thick. Type I and Type II cards can be used in a
single socket, but Type III cards take up two sockets.
PCMCIA Socket
(eject dummy card to use)
Eject Button