AEG DD8694-M - Manual (Page 10)

USE 10
USE
button Function Display
A Turns the suction motor on and off at
speed one. Displays the set speed
b Decreases the working speed. Displays the set speed
c Increases the working speed. Displays the set speed
D Activates intensive speed from any other
speed, including motor off. This speed is set
to operate for 5 minutes, after which the
system returns to the speed that was set
before. Suitable to deal with maximum levels
of cooking fumes. Displays HI and the time remaining once every
second.
When the filters alarm is triggered, the alarm
can be reset by pressing and holding this
button for ap-proximately 3 seconds. These
indications are only visible when the motor
is turned off. F indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
c indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in opera-
tion for 200 working hours.
e Delay function
Activates automatic switch-off with a 20’
delay. Suit-able to complete elimination of
residual odours. Can be activated from any
position, and is disabled by pressing the button
or turning the motor off.
Displays the operating speed and the dot at the bottom
right flashes alternately with the remaining time.
Press and hold the button for approximately 5
sec-onds, with all the loads turned off (Motor
and Lights), to turn the Activated Charcoal
Filter alarm On and Off. - c flashes twice - A.C. Filter alarm Activated.
- c flashes once - A.C. Filter alarm Deactivated
F Turns the lighting system on and off at
maximum intensity.
� � � � � �