Asus T4-P5P43 - Manual (Page 87)

5-21 ASUS T-P5P43
5.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
NorthBridge Configuration
Configure North
Bridge
North Bridge chipset Configuration
Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3328MB
DRAM Frequency [Auto]
Initiate Graphic Adapter [PEG/PCI]
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system. Configuration options: [Enabled] [Disabled]
DRAM Frequency [Auto]
Allows you to set the memory operating frequency.
Configuration options: [Auto] [667 MHz] [800 MHz] [1066 MHz] [1333 MHz]
Selecting a very high DRAM frequency may cause the system to become
unstable if this happens, revert to the default setting.
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory