Asus V3-M3N8200 - Manual (Page 56)

4-4 Chapter 4: Motherboard info
4.4 Connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the floppy disk drive (FDD) signal cable. Insert one
end of the cable to this connector, then connect the other end to the signal
connector at the back of the floppy disk drive.
• Pin 5 on the connector is removed to prevent incorrect cable connection
when using an FDD cable with a covered Pin 5.
• The Floppy Disk Drive signal cable is purchased separately.
2. TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which
can securely store keys, digital certificates, passwords, and data. A TPM
system also helps enhance network security, protects digital identities, and
ensures platform integrity.
R
Floppy Disk Drive Connector
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN1
FLOPPY
R
TPM Connector
TPM
S_SMBCLIK_MAI
N
S_SMBCLK_MAI
N
GND
S_PL
TRST#
F_FRAME# C_PCICLK_TPM
1
GND
F_LAD1 F_LAD2
F_LAD0 +3V +3V F_LAD3
GND
F_SERIRQ#
GND +3VSB S_PWRDWN#
The TPM model is purchased separately!