Asus Pundit-S - Manual (Page 25)

ASUS Book Size Barebone System 2-11
5. Connect a power cable from
the power supply to the power
connector at the back of the
CD/DVD-ROM. Use the cable
with the white connector
labeled P4.
6. Connect one end of the IDE
ribbon cable to the IDE
interface at the back of the
CD-ROM, matching the red
stripe on the cable with Pin 1
on the IDE interface.
7. Connect one end of the
CD-ROM audio cable to the
4-pin connector at the back of
the CD/DVD-ROM.
8. Connect the other end of the
IDE ribbon cable to the
primary IDE connector (blue
connector labeled PRI_IDE2)
on the motherboard.
Red Stripe to Pin 1
IDE Ribbon Cable
Power Cable (P4)
CD/DVD-ROM Audio
Cable
9. Connect the other end of the
audio cable to the black 4-pin
connector labeled CD on the
motherboard.
CD/DVD-ROM
Connector
(CD1)
Primary IDE connector
(PRI_IDE1)