Asus Pundit-S - Manual (Page 27)

ASUS Book Size Barebone System 2-13
2.8 Replace the cover
After you have installed all the internal components and you have
connected all the necessary cables, you are now ready to put the system
back together.
Follow these steps to re-assemble
the system.
1. Replace the front cover bezel.
Make sure the front bezel
locks are properly clamped in
place.
2. Align chassis cover tabs and
push chassis cover towards
the front panel.
3. Make sure the four screw
holes on the chassis cover are
aligned to the holes on the
case.
4. Tighten the four screws.