Asus ET2301IUTH - Manual (Page 21)

English
21 All-in-One PC ET2301
Chapter 2: Using your All-in-One PC
Positioning your All-in-one PC
1. Place your All-in-One PC on a flat surface
such as a table or desk.
2. The display can be adjusted to an angle
between 5 0 to 177 0 .
IMPORTANT! Avoid adjusting the display to
an angle beyond the recommended values or
you may risk damaging the All-in-One PC.
5 O
177 O
3. To adjust the angle of the display, hold the
upper-right corner with your right hand
while supporting the lower-left corner with
your left hand.