Asus ET2301IUTH - Manual (Page 36)

English
6 All-in-One PC ET2301
5. The Input Select menu appears when you connect an HDMI cable to the rear HDMI port.
Use the Menu Up or Menu Down buttons to select input source and press the Menu
button to activate the option.
NOTES:
• By default, the All-in-One PC is set to PC mode, where the All-in-One PC is the display
input source. The touch screen, webcam and rear USB ports will be controlled by the All-
in-One PC even if Device Share is enabled.
• When switching the display input source to HDMI (where the All-in-One PC is used as a
desktop LCD monitor), the touch screen, webcam, and rear USB ports will be controlled
by the external notebook/desktop PC if Device Share is enabled.
• Device Share can be enabled even if the All-in-One PC is powered off. If you power on the
All-in-One PC while using an external device on Device Share, an Input Select OSD menu
will appear for display signal selection.