8 chapter 6: raid configuration – Asus RS120-E5/S User Manual
Page 108
6-8
Chapter 6: RAID configuration
6. Select
RAID from the Logical Drive menu, then press <Enter>.
7. Select the
RAID level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8. When creating a
RAID 1 set, select DWC from the Logical Drive menu, then
press <Enter>.
When creating a
RAID 0 set, proceed to step 10.
9. Select
On to enable the Disk Write Cache setting, then press <Enter>.
Enabling DWC can improve the performance, but with the risk of data loss.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
DNLIN A00-00
DNLIN A00-01
0
1
Easy Configuration - ARRAY SELECTION
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 77247MB 2 64 KB ONLINE
Logical Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Choose RAID Level For This VD
RAID Level
RAID 0
RAID 1
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management
Configure
Initialize
Objects
Rebuild
Check Consistency
DNLIN A00-00
DNLIN A00-01
0
1
Easy Configuration - ARRAY SELECTION
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 77247MB 2 64 KB ONLINE
Logical Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
Change DWC
Off
On