Asus RS120-E5/S - Manual (Page 56)

Chapter 4: Motherboard information 4-6
4. Integrated graphics controller (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard graphics controller.
P5BV-R
®
P5BV-R RAID select jumper
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2
1
2
3
P5BV-R
®
P5BV-R VGA setting
VGA_EN1
Enable
(Default)
Disable
2 1 3 2
5. RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper cap over pins 1-2 if you want to use
the LSI Logic Embedded SATA RAID Utility (default); otherwise, place the
jumper cap to pins 2-3 to use the Intel ® Matrix Storage Manager utility.