Asus V2-AE1 - Manual (Page 109)

A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 5 - 3 5 5 - 3 5 5 - 3 5 5 - 3 5 5 - 3 5
5.7 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Pressing <Esc> does not immediately exit this menu. Select one of the
options from this menu or <F10> from the legend bar to exit.
Exit & Save Changes Exit & Save Changes Exit & Save Changes Exit & Save Changes Exit & Save Changes
Once you are finished making your selections, choose this option from the
Exit menu to ensure the values you selected are saved to the CMOS RAM.
An onboard backup battery sustains the CMOS RAM so it stays on even
when the PC is turned off. When you select this option, a confirmation
window appears. Select [ O k ]
[ O k ] [ O k ] [ O k ] [ O k ] to save changes and exit.
If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Press <Enter> to save the changes while
exiting.
Select Screen
Select Item
Enter Go to Sub Screen
Tab Select Field
F1
General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Exit
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Clear User Password Clear User Password Clear User Password Clear User Password Clear User Password
Select this item to clear the user password.
Configuration options: [Setup] [Always]
Password Check [Setup] Password Check [Setup] Password Check [Setup] Password Check [Setup] Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]