Hyundai H-DVD5062 - Manual (Page 20)

H-DVD5062 ( www.hyundai-electronics.ru ) 20
3D surround: The audio out is virtual surround sounds (only for 5.1CH player).
5.1CH: Turn off downmix function. If playing 5.1CH discs or the unit is
connected with 5.1 channel amplifier, this item should be selected (only for
5.1CH player).
FRONT, CENTER, REAR, SUBWOOFER SPEAKER
If your speaker system includes the above speakers, you can set these items
according the real speaker states. In karaoke On mode, or downmix is not set to
Off, these setup don't work.
DIALOG
With Audio output mode, and choose LT/RT stereo then under the Speaker setup
page you can select Dialog item and adjust volumes.
While playing 5.1CH disc, can adjust speakers volumes via Dialog.
D.R.C.
Dynamic compress output can lower volumes processing sound effect under the
conditions of within speakers max output. The item is divided into On, Off, Auto.
Digital audio setup
DIGITAL OUTPUT
SPDIF off: no digital signal out (coaxial output off), only analog audio output.
All: digital signal output in the original format recorded in the disc.
PCM only: digital signal output in the decoded PCM form.
LPCM OUTPUT
Select PCM frequency at 48 kHz or 96 kHz
Note: some amplifiers don't support 96 kHz sampling and cause coaxial output
abnormal.
The initial factory setup is 48 kHz.