Hyundai H-DVD5062 - Manual (Page 28)

H-DVD5062 ( www.hyundai-electronics.ru ) 28
If the disc contains 2 or more tracks, chapters or titles, set up the playing
order to your preference. Press PROG button to enter program menu.
Press numeric buttons to input the number of the track, title or chapter. If the
programmed tracks are over ten, press NEXT button to go on programming.
Use the cursor buttons to move the cursor to the START. Press PLAY button
to start programmed playback.
Note: For MP3 disc, this function is not available.
SETUP
Press SETUP button to enter or exit DVD player’s setup menu.
V-MODE
Press V-MODE button to switch the video output mode.
A-MODE
Press A-MODE button to switch the audio output mode.
L/R/ST
When playing Super-VCD (SVCD), VCD, CD disc with multi-channel, press
L/R/ST button to select left channel/right channel/stereo/mix audio output.
ENTER
Press ENTER button for confirmation of chosen options.
STEP
When playing DVD, SVCD, VCD disc, press STEP button once, the picture
changes to next frame. Press PLAY button to resume normal play.
OSD
Press the OSD button; the relative information of the disc will be displayed
on the TV screen.
REPEAT
Press REPEAT button to repeat a title, chapter, track or the whole disc.
When playing DVD disc, press REPEAT button continually, the TV screen
shows chapter => Title => All => OFF.
When playing SVCD, VCD, CD disc, the turn is following: Track => All =>
OFF.