Asus SL1200 - Manual (Page 29)

12
Chapter 3 - Quick Start Guide
ASUS SL1200
LAN1 – LAN4 on the rear panel of the device and connect the other end to
the Ethernet port of a computer.
If your LAN has more than four computers, you can attach one end of an
Ethernet cable to a hub or a switch, such as an uplink port (refer to the hub
or switch documentations for instructions), and the other to the Ethernet
switch port (labeled LAN1 – LAN4) on the router.
Either the crossover or straight-through Ethernet cable can
be used to connect the built-in switch and computers, hubs
or switches.
3.1.3 Attach the power adapter
Connect the AC power adapter to the POWER connector on the back of
the device and plug in the adapter to a wall outlet or a power strip.
3.1.4 Turning on the ASUS SL1200
After plugging in, the router will be automatically turn on. Turn on your
ADSL or cable modem, your computer(s), and any LAN devices such as
hubs or switches.
Figure 3.1. Overview of Hardware Connections