Braun 5441 Flex Integral System - Manual (Page 10)

10
B Clean&Charge
Braun Clean&Charge has been developed for cleaning,
charging and storing your shaver. Clean your shaver
daily in the Clean&Charge.
During the automated cleaning process, the shaver is
switched on and off at intervals to obtain best cleaning
results. Since the specially formulated cleaning fluid
contains a small amount of oil, the cleaning procedure
also fulfills the lubrication needs of the shaver.
Important
• Only use the power supply cord set supplied with
the shaver.
• In order to avoid any leakage of the cleaning fluid,
place the appliance on a flat, stable surface. Do
not tip, move suddenly or transport in any way if a
cleaning cartridge is installed.
• Do not place the appliance in a mirror cabinet, nor
store it over radiators, nor place it on polished or
laquered surfaces. Do not expose to direct sunlight.
• The appliance contains highly flammable
liquid. Keep it away from sources of ignition.
No smoking. Keep out of reach of children. Do not
refill cartridge. Use only original Braun refill
cartridge.
• When cleaning the shaver, its protection cap should
be removed.
Description
12 Lift button for cartridge exchange
13 Contact bow
14 Release button
15 Operation mode selector
16 «clean» light: cleaning process indicator
17 «charge» light: charging process indicator
18 «cartridge» light: cartridge replacement indicator
19 Cleaning cartridge
Technical specifications
• Power consumption:
• 3 W when cleaning
• 7 W when charging
• Power supply: 100 -240 V ~ / 50 or 60 Hz
(automatic adaptation)
• Input voltage: 12 V
5485458_S.4-38.fm Seite 10 Dienstag, 22. Januar 2002 10:22 10