Asus T2-R - Manual (Page 23)

23 ASUS Terminator 2 barebone system
2. Align the retention bracket with
the rails on the side of the CPU
fan.
3. Attach the retention bracket
hook to the retention module
hole.
2.5.3 Re-installing the CPU fan and heatsink
assembly
To re-install the CPU fan and heatsink assembly:
1. Position the CPU fan and
heatsink assembly on top of the
installed CPU.
4. Carefully press down the
locking lever on the other side
of the retention bracket.
5. Attach the locking lever hook to
the retention module hole to
secure the fan and heatsink
assembly in place.
6. Follow steps 2 to 5 to re-install
the second retention bracket.
7. Connect the CPU fan cable to
the CPU fan connector on the
motherboard.
1
2
3
4
5
7